When creating a lap on a line there needs to be 3 options 'left / center / right' of the line with an offset amount. this needs to be independent for each line lap location. Also, an option for stagger for 2, 3, 4... bar stagger groups with a stag...

When creating a lap on a line there needs to be 3 options 'left / center / right' of the line with an offset amount. this needs to be independent for each line lap location. Also, an option for stagger for 2, 3, 4... bar stagger groups with a stag...

This is a standard thing when designing steel structures. The software should be able to display tapered washers instead of user having to do it manually. The software should differentiate between I and U washers (DIN 435, DIN434)

In ProStructures, Workframe grids are not exporting to IFC at all.

Currently, the only way to achieve this is to model two separate rebarsets which are starting from the other face of the concrete.. This doesn't match the Istruct E standard methods of detailing structural concrete when detailing ABR reinforcement...

When positioning bars, there are scenarios wherein you need to set position numbers/bar marks according to their bar range/location in the model. For example, a circular RC slab would always start its numbering at the middle (sorting by length), r...

When exported a 2D drawing view model to Native Drawing the vertical oriented or inclined texts of Position Flags and Part Names are repositioned to horizontal direction.

'Ticks' and 'Tags' and 'Longitudinal Bar Label' does not give an option to modify the output. This means that the original marks are always shown. For certain projects I find the need to use user marks due to splayed bars in a different rebar set ...

If i'm showing elevation view and have 2 bar ranges lap each other, with fudge the whole group of bar will save a lot of time than fudging individual bar.

In ProSteel, User can define a Position flag style for Position Number Annotation in Drawing. In Position flag style, A MicroStation text style can be selected for Position Number Display. But text height can only be inherited and text width is ig...