When positioning bars, there are scenarios wherein you need to set position numbers/bar marks according to their bar range/location in the model. For example, a circular RC slab would always start its numbering at the middle (sorting by length), r...

When creating a lap on a line there needs to be 3 options 'left / center / right' of the line with an offset amount. this needs to be independent for each line lap location. Also, an option for stagger for 2, 3, 4... bar stagger groups with a stag...

When creating a lap on a line there needs to be 3 options 'left / center / right' of the line with an offset amount. this needs to be independent for each line lap location. Also, an option for stagger for 2, 3, 4... bar stagger groups with a stag...

Currently, the only way to achieve this is to model two separate rebarsets which are starting from the other face of the concrete.. This doesn't match the Istruct E standard methods of detailing structural concrete when detailing ABR reinforcement...

It is necessary to be able to group elements (such as foundations and their reinforcement bars) in order to be able to modify a reinforcement bar and have it modified in the rest of the other foundations that are geometrically equal and have the s...

Unable to search Partlist Elements by Structural Properties when reference into the master file using Search Part tool or Explorer.

The splice connection from the connection center does not work for PFC or C sections resulting in wrong placements of left/right web plates and also fails to create bolts for the same.

Add a feature to include prestressing tendons in prestressed girders/beams. Also, some girders have a few tendons depressed/harped/draped. Being able to model them with ease in ProConcrete would be very beneficial. In addition, the dialog box for ...

Currently crank lapped bar is only graphically shown as crank for reports and partlist it is considered as straight. There should be option to treat cranked lapped bar as straight or crank physically.

Why don't Partlist elements show tooltip information? Name, Material, Note 1, Position Number, etc. These are all properties that need to be verified for Partlist element and it would be very beneficial if users could view the properties in a tool...