This will allow users to have multiple slices according to distance and determine the number of slices. In the current version of ProStructures, the Associative Slice by Distance only sets one slice. This will be helpful in placing rebars with ass...

Enabling "Number of Bars each Group" option under Vary Sets of Irregular Dispatch Reinforcing. This is important to group bars with lengths of very small increments, to quantify as one. So we can detail these bars as field-cut bars.

SHEARPLATE CONNECTIONS - Stiffener Beam to Beam Connection (While Cloning Multiple Selection is not available.) By Selecting one by one beam in more than 1000 connections, creating mistakes as well as wasting too much time also. this should be sol...

Currently, the only way to achieve this is to model two separate rebarsets which are starting from the other face of the concrete.. This doesn't match the Istruct E standard methods of detailing structural concrete when detailing ABR reinforcement...

Add a feature to include prestressing tendons in prestressed girders/beams. Also, some girders have a few tendons depressed/harped/draped. Being able to model them with ease in ProConcrete would be very beneficial. In addition, the dialog box for ...

Currently crank lapped bar is only graphically shown as crank for reports and partlist it is considered as straight. There should be option to treat cranked lapped bar as straight or crank physically.

When creating a lap on a line there needs to be 3 options 'left / center / right' of the line with an offset amount. this needs to be independent for each line lap location. Also, an option for stagger for 2, 3, 4... bar stagger groups with a stag...

It is necessary to be able to group elements (such as foundations and their reinforcement bars) in order to be able to modify a reinforcement bar and have it modified in the rest of the other foundations that are geometrically equal and have the s...

When positioning bars, there are scenarios wherein you need to set position numbers/bar marks according to their bar range/location in the model. For example, a circular RC slab would always start its numbering at the middle (sorting by length), r...

Rebar for standard shapes like column, Beam, Pad footing can be placed multiple times easily using templates. Similarly, rebar of irregular shapes could be copied or re-recreated from one element to another.